FILMDECK FOR SAMSUNG G65B 1.0.0 Target monitor: LS27BG652ENXGO Complete live guide and help: https://filmdeck-samsung.pages.dev/ This is an unsigned development app. Samsung requires a device-specific certificate before installation. No profiles. LET’S GET IT ON YOUR MONITOR A little setup.Then just press play. Start on your Windows PC. Keep this page open on your phone while following the monitor steps. What’s ready: the app, Windows helper, and these instructions. Physical installation and Samsung-native playback still need to be verified on your monitor. Print or save this guide 0 of 6 steps checked Reset checklist 01 Download and unpack FilmDeck - Click Download for Windows setup above. Save the ZIP to your Downloads folder. - In File Explorer, right-click the ZIP and choose Properties. If you see an Unblock checkbox near the bottom, check it and click Apply. This removes the downloaded-file mark from this copy only. - Right-click the ZIP and choose Extract All, then Extract. Open the extracted folder, not the ZIP preview. - You’ll see Start-Setup.cmd, Setup-FilmDeck.ps1, an App folder, and an offline guide. Keep them together. - Double-click Start-Setup.cmd. A FilmDeck setup window opens. Leave it open while completing the next steps. The helper is readable PowerShell, not a signed Windows installer. It uses RemoteSigned for its own process only. If your computer blocks scripts, use the manual installation route below instead of changing system-wide security settings. Files extracted and setup window open 02 Put the PC and monitor on the same network - On the monitor, open its Smart Hub / Home screen using the monitor remote. Switch away from the PC’s HDMI or DisplayPort picture if necessary. - Open Settings → All Settings → Connection → Network → Network Status → IP Settings. On some firmware, Network is under General instead of Connection. - Write down the monitor’s IP address, for example 192.168.1.50. Use its home-network address, not a public internet address. - Enter that address in the FilmDeck setup window. The helper displays the PC address it would use to reach the monitor. You’ll enter that PC address into Developer Mode next. - Both devices must use the same home router. Wired Ethernet on the PC and Wi-Fi on the monitor is fine. Avoid guest Wi-Fi, client isolation, and a VPN connection during setup. Monitor IP entered and PC address noted 03 Enable Samsung’s Developer Mode - On the monitor’s Home screen, open Apps. - Open Apps Settings if it is listed within Apps, then enter 1, 2, 3, 4, 5 with the remote’s number buttons. If the remote has a 123 button instead, use its onscreen number pad. This should open the Developer Mode dialog. - Set Developer Mode to On. In Host PC IP, enter the PC address shown by the helper, not the monitor’s address. - Confirm and restart the monitor as requested. If a normal power-button press only puts it in standby, turn it off, unplug power briefly, then reconnect it. - Return to Apps and verify Developer Mode remains enabled. Use the normal Apps screen, not the service menu. If 12345 does nothing, check Apps Settings within Samsung Apps. Older firmware may accept the sequence directly on the Apps panel. Do not use a PC window or the app search box. See Samsung’s TV device setup. Developer Mode on, PC address entered, monitor restarted 04 Install Samsung’s tools on the PC - Download the Windows 64-bit Tizen Studio 6.1 installer (about 660 MB) from the official Tizen download server. Keep the default folder, C:\tizen-studio, unless you have a reason to change it. - Open Tizen Studio Package Manager. Install the web app tools and, under Extension SDK, the Samsung TV Extension and Samsung Certificate Extension. Package labels vary by SDK release. These are Samsung’s development tools, not a monitor firmware update. - The current Samsung TV Extension page has the supported packages and installation references. You do not need to run a TV emulator for this installation. - Return to FilmDeck setup. Confirm the Tizen Studio folder is correct, then click Check connection. Allow Samsung’s SDB tool on your private home network if Windows Firewall asks. - Open Samsung’s Device Manager, add a remote device using the monitor IP and port 26101, and connect it. Keep the monitor powered on. An already-installed SDK is fine if it includes tools\sdb.exe, tools\ide\bin\tizen.bat, the Samsung TV Extension, and the certificate tools. No Node.js or Python installation is needed on your PC. Samsung tools installed and monitor connected 05 Create a certificate for your monitor - In Tizen Studio, open Tools → Certificate Manager and choose the plus button to create a profile. - Choose Samsung, then TV. Name the certificate profile FilmDeck so it matches the helper. - Create a new author certificate. Use your own name and a password you’ll keep securely. Sign into your own Samsung account when Samsung’s tool asks. - Create the distributor certificate and add the connected monitor’s DUID. The wizard can list connected devices; select this G65B. If it does not appear, return to Device Manager and reconnect the monitor. - Finish the wizard and make the FilmDeck certificate profile active. In Device Manager, if the monitor’s context menu offers Permit to install applications, select it. Keep the author certificate for future updates. Never upload its private key or password here. The distributor certificate must include this monitor’s DUID; a generic Tizen certificate or someone else’s device certificate will not work. Samsung’s certificate guide Samsung TV certificate created with this monitor’s DUID 06 Install, open, and check playback - In FilmDeck setup, verify the monitor IP, SDK folder, and certificate profile name FilmDeck. - Click Install FilmDeck. The helper checks the app files, asks Samsung’s tool to sign the app, installs it over the network, and sends the launch command. - Look at the monitor. FilmDeck should open on Home. If it doesn’t, check Apps for FilmDeck and launch it there. If offered, add it to Home for easy access. - Open a film and play it briefly. Check the picture, audio, pause, seeking, and Back. Then try a series episode. Samsung-native playback has to be confirmed on the actual monitor; a browser preview alone cannot prove it. - After installation succeeds, close the setup helper. The PC does not need to stay on for FilmDeck to run. The monitor still needs internet access. The helper displays Samsung’s actual command result and bounded diagnostics. “Launch accepted” means the SDK accepted the command; the monitor’s picture is the final check. App opened and a film plus episode played on the monitor The monitor install and native playback must be checked on the actual device. Do not share private certificate files or passwords.